Use the links below to jump to a section, or continue reading for the full article. You can also view the full specifications, image gallery, charging performance, and online reviews. Sections:
Performance
The XPENG P7i 610 AWD has a maximum power of 348 kW (473 hp / 467 bhp) and a total torque of 757 Nm (559 lb-ft). It accelerates from 0 to 100 km/h (0 to 62 mph) in 3.9 seconds and reaches a top speed of 200 km/h (124 mph).
Battery, Range, and Charging
The battery has a gross capacity of 86.2 kWh and a net usable capacity of 82.7 kWh, with a 3.5 kWh buffer (4.1%) for battery protection. With a nominal voltage of 400 volts, the system is classified as a 400-volt battery system.
The lithium-ion battery uses NMC (nickel manganese cobalt) chemistry.
The vehicle's range, according to the CLTC (China Light-Duty Vehicle Test Cycle) standard, is 610 km (379 miles).
The energy consumption is 13.6 kWh/100 km based on the CLTC standard test.
For more details about the range, see real-world data and range listings on this model’s range and consumption page.
The vehicle supports fast DC charging with a maximum power of 200 kW. A 0–100% charge takes approximately 55 minutes. A typical 10–80% session takes about 22 minutes at an average power of 159 kW.
With five minutes of overhead per stop, the optimal charging window is 7–69%. Effective average power, including overhead, is 133 kW over a session lasting about 23 minutes and 9 seconds.
This efficient charging capability makes the XPENG P7i 610 AWD a convenient option for long-distance travel.
Onboard Charger
The standard onboard charger supports AC charging at up to 11 kW. A full 0–100% charge takes about 7 hours and 31 minutes with a suitable home charging setup.
Charge Port
The location of the charge port is on the right rear side. This placement makes it easy to use charging stations that require backing up to connect.
Connector types vary by market: this model uses CCS Combo 1 in North America and CCS Combo 2 in Europe. For complete specifications for all markets, refer to the full specifications.
Bidirectional Charging
This model supports V2L (Vehicle to Load), allowing you to power electrical equipment requiring up to 3300 kW of power, and even charge other electric vehicles.
Drivetrain
The XPENG P7i 610 AWD features an all-wheel drive system powered by two motors, one on each axle.
The motors used are Induction Motors.
Suspension
The suspension system features a double wishbone front construction and a five-link rear construction. Both the front and rear dampers are electronically controlled, providing adaptive damping for improved ride comfort and handling. The front and rear springs are coil springs, offering a balance of comfort and performance.
The Adaptive Damping Suspension suspension has steel springs with a fixed height, but you can adjust damping to fit your driving style or road condition.
Drive Modes
The XPENG P7i 610 AWD lets the user select different drive modes that affect the car's handling.
The driver can choose between 1 modes:
- : Default drive mode settings.
Brakes
The XPENG P7i 610 AWD is equipped with cast-iron disc brakes on both the front and rear.
The front discs measure 355 mm, while the rear discs are 340 mm.
Regenerative Braking
Regenerative braking works in two ways: through one-pedal driving, or through the brake pedal using blended braking while coasting.
The system stops the car completely using friction brakes.Drivers can also adjust the regenerative braking strength when lifting off the accelerator, choosing between three levels.
The maximum regenerative braking power is 150 kW.
Exterior
The XPENG P7i 610 AWD, with dimensions of 4888 mm in length, 1896 mm in width, and 1450 mm in height, falls into the E-segment, also known as executive cars.
The XPENG P7i 610 AWD offers a selection of 5 paint colors, featuring solid, metallic, and matte options.
You can select from multiple wheel designs, all available in the same size, on the XPENG P7i 610 AWD. The available tire and wheel combinations include:
- 245/45 tires on 19" rims
The car has four regular doors and a hatchback-style liftgate.
There is only one roof option for this model.
A fixed panoramic glass roof extending from front to rear is standard, making the cabin feel brighter and more spacious. An electric sunshade helps protect occupants from direct sunlight.
The windows behind the B-pillar are tinted for privacy and to reduce glare and solar heat gain.
XPENG P7i 610 AWD
Interior
Seats
The XPENG P7i 610 AWD accommodates five passengers with two front seats and a three-seat bench in the rear.
First Row Seats
The XPENG P7i 610 AWD offers a single type of front seat.
The following functionalities are available on the seat:
- Fore-and-aft adjustment (electrically adjustable)
- Recline adjustment (electrically adjustable)
- Height adjustment (electrically adjustable)
- Seat cushion angle adjustment (electrically adjustable)
- Height adjustable headrest (electrically adjustable)
- Heating
- Memory (standard for driver, not available for passenger)
- Adjustable lumbar support (electrically adjustable)
- Backrest side-bolster adjustment
- Seat cushion side bolsters adjustment
- Adjustable thigh support
- Ventilation
- Massage
- Leg support for passenger (standard for passenger seat)
Available in:
Second-Row Seats
The second row features a standard three-seat bench with a SixtyForty split, allowing each section to fold separately to increase cargo space.
Additional second-row features include:
- Height adjustable headrest (manually adjustable)
- Heating (standard for outer seats)
- ISOFIX (standard for outer seats)
Interior Lighting
The XPENG P7i 610 AWD offers several interior lighting options.
- Multicolor Ambient Lighting: Across the dashboard, door panels, and footwell, with selectable colors.
- White Roof Reading Light: White reading lights are mounted in the roof area.
- White Dome Light: A white dome light is mounted in the roof area.
- en interior.light.cargo.white.trunk
Climate System
There is one climate system available:
- 2-zone climate system: Supports different temperatures for the driver and passenger.
A standard heat pump reduces heating energy use in cold weather.
User Interface and Control
The XPENG P7i 610 AWD features a screen-focused control interface with limited physical buttons and no stalks, providing a minimalist approach to vehicle controls. This design prioritizes touchscreen interaction, which may appeal to tech-savvy users but could be less intuitive for those accustomed to traditional controls.
Behind the steering wheel is a digital instrument cluster, and on the right part, there is an infotainment screen.
Key screen details:
- Driver Information Display: A 10.3-inch screen mounted directly on the dashboard behind the steering wheel. This compact display shows essential driving information such as speed, range, and navigation prompts.
- Center Dashboard Touchscreen: The 15.0-inch touchscreen is located at the center of the dashboard. It serves as the main interface for infotainment, navigation, and vehicle settings.
A standard head-up display projects key driving information—such as speed and navigation cues—onto the windshield.
XPENG P7i 610 AWD
Steering Wheel
The XPENG P7i 610 AWD is equipped with a single type of steering wheel:
The steering wheel adjusts for tilt and reach. The adjustment is electrically powered.
Design: Circular
Heating: Heated (standard)
From the steering wheel you can control:
- Infotainment: Steering-wheel controls provide access to media and infotainment functions.
Mirrors
Both the exterior and interior mirrors use conventional mirror technology to provide a clear view of the area behind the vehicle.
Voice control is standard.
Infotainment
en infotainment.os.Xmart OS
Navigation System
The built-in navigation supports route planning with target charge levels at the destination and at charging stops, real-time traffic, and satellite maps.
App Store
The infotainment system includes an App Store where you can download third-party apps to run natively on the car's screen without needing a connected phone. Available apps vary by market.
Sound System
The XPENG P7i 610 AWD has one sound system option:
- Dynaudio Confidence: The system has 18 speakers and a maximum output of 960 watts.
The model includes USB-C connectivity as standard (total: 2).
Mobile App
The XPENG P7i 610 AWD has a mobile app for Android and iOS to manage and monitor the vehicle remotely. Features:
- Locate Your Vehicle: Check the current location of your car.
- Preconditioning: Preheat or cool your car before you start your journey.
- Remote Parking: Park or exit a parking space remotely from the app.
- Lock and unlock: Lock or unlock the doors remotely.
- Window Control: Open or close the windows remotely.
- Scheduled Charging: Set a charging schedule.
- Charge Target: Set the battery's target state of charge.
- Find your car: Sound the horn or flash the lights to locate the car.
- Route Planning: Plan your route and send it directly to your car's navigation system.
- Driving History: Review the details of your past trips.
Lights
The standard headlights use LED Matrix technology. LED Matrix splits the headlight beam into dozens of small rays that the controller can turn on and off individually to selectively dim areas ahead. Corner lights illuminate the side when turning.
The taillights use LED technology.
XPENG P7i 610 AWD
Advanced Driver Assistance Systems
The XPENG P7i 610 AWD offers standard and optional advanced driver assistance systems (ADAS).
Efficiency Assist: A Standard feature that helps drivers anticipate driving conditions and conserve energy.
Safety Systems
Anti-lock Braking System (ABS): Standard on the XPENG P7i 610 AWD. It prevents the wheels from locking during braking.
Electronic Stability Control (ESC): Standard on the XPENG P7i 610 AWD. It improves stability during sudden maneuvers and on slippery roads.
Lane-Keeping Assist (LKA): Standard on the XPENG P7i 610 AWD. It applies steering corrections if the vehicle begins to leave its lane.
The Lane Departure Warning alerts the driver if the vehicle begins to leave its lane.
Front Cross Traffic Assist (FCTA): Standard on the XPENG P7i 610 AWD. It detects traffic crossing ahead when entering an intersection or pulling away from a stop.
Rear Cross Traffic Alert (RCTA): Standard on the XPENG P7i 610 AWD. It detects vehicles approaching from the side while reversing out of a parking space or driveway.
Forward Collision Warning (FCW): Standard on the XPENG P7i 610 AWD. It warns the driver of a potential frontal collision.
Automatic Emergency Braking (AEB): Standard on the XPENG P7i 610 AWD. It applies the brakes automatically if the driver does not respond to an imminent collision.
Automatic Emergency Steering (AES): Standard on the XPENG P7i 610 AWD. The system can steer automatically to help avoid an imminent collision.
Blind-spot Monitoring (BSM): Standard on the XPENG P7i 610 AWD. It detects traffic in the vehicle's blind spots.
Exit Warning: Standard on the XPENG P7i 610 AWD. It warns occupants not to open a door when it detects approaching traffic or another hazard.
Driving Automation
The standard XPILOT 4.0 / XNGP SAE Level 2 system includes the following driving automation features:
- Adaptive Cruise Control (ACC)
- Lane Centering Assist (LCA) / AutoSteer: Centers the vehicle in its lane and adjusts speed in traffic. The driver must keep their hands on the steering wheel and remain attentive.
- Navigation-guided driving: Follows the planned route, including highway entry and exit.
- Automatic parking
- Automatic Lane Change (ALC)
- Traffic light control: Responds to detected traffic signals.
- Stop-sign control: Detects and responds to stop signs.
Sensors & Cameras
This model uses cameras, radar, LiDAR and ultrasonic sensors for its driver assist systems.
The vehicle’s surroundings are monitored by radar sensors (five), LiDAR sensors (two), cameras (nine), and ultrasonic sensors (12).
Safety
The XPENG P7i 610 AWD is equipped with the following airbags:
- Front airbags for the driver and front passenger
- Side curtain airbags for both the first and second rows
- Side airbags for the driver and front passenger
Security and Access Technologies
The XPENG P7i 610 AWD includes the following security and access features:
- Keyless Entry and Start: Unlock and start the car with the key in your pocket or bag.
- Phone-as-Key Functionality: Use your smartphone as a digital key to unlock and start the vehicle.
- Alarm System: Monitors for unauthorized entry or tampering and sounds the alarm when triggered.
- Integrated Dashcam: Records video while driving.
- Parking Surveillance: Uses the vehicle's cameras to monitor its surroundings while parked.
Cargo Capacity and Towing Ability
The trunk offers a cargo capacity of 440 liters (15.5 cu ft).
The maximum roof load is 75 kg (165.3 lb).
The maximum permitted vehicle weight is 2570 kg (5666 lbs), and the base curb weight is 2060 kg (4542 lbs). This leaves a payload of 510 kg (1124 lbs), including occupants. Options can increase curb weight and reduce payload.
This model is not available with a towbar and cannot tow a trailer.
Availability & Pricing
This model had a world premiere on 3/10/2023, and deliveries started in April 2023. This model has now been discontinued.
Pricing
Pricing may vary depending on local conditions, incentives, and promotions. Below are the starting prices for select countries:
- 289,900 yuan (China)