XPENG P7 AWD Performance
XPENG P7 AWD Performance is an all-electric sedan with a WLTP range of up to 505 km (314 miles). EVKX.net have all the details.
XPENG P7 AWD Performance
We have separated our description of the XPENG P7 AWD Performance into sections. If you want to wait to read the full article, click the links below to the different areas. We also have an overview of the full specifications, an image gallery, detailed information about charging performance, and some online reviews. Our sections:
- Battery, range, and charging
- Drivetrain (suspension, brakes, steering)
- Exterior (paint colors, wheels ++)
- Interior (seats++)
- User interface and control
- Advanced driver-assistance systems
- Transportation capabilities
The XPENG P7 AWD Performance has a maximum power of 405KW (551hp). The total torque is 717nm. The 0-100km/h sprint (0-62mph) takes 3,9 seconds. The top speed is 205 km/h.
Battery, range, and charging
The battery has a gross capacity of 86,2kWh and a net capacity of 82,7kWh, meaning you have a 3,5kWh buffer for protection. (4,1%). The battery is a Lithium-Ion battery based on NMC technology. The WLTP range is 505 km (314 mi). The consumption is 16,4kWh/100km for the WLTP standard test. For more details about the range, see real-world data and range listing on this model’s range and consumption page.
The maximum DC charging speed is 175kW. A full charge from 0 - 100% would take 50 minutes, while a more common scenario of 10-80% would take 23 minutes. If you assume you lose 5 minutes driving per charge stop in addition to the charge time, the optimum charge area is from 1% to 53% resulting in an actual charge speed including time loss on 149kW. Each charge session would take 17 minutes and 21 seconds.
For the theoretical 1000km challenge, starting with a full battery and driving at 120km/h (75 mph), assuming optimal driving conditions and consumption of 28kWh/100km, 1000km will take 9 hours and 40 minutes to drive. This trip will require five charge session(s) charging from 1% to 49%. The total time lost for charging will be 80 minutes.
For level 1 and level 2 AC charging, the onboard charger supports up to 11KW charging. As a result, you can charge the battery 0-100% from home in about 7 hours and 31 minutes.
XPENG P7 AWD Performance has an all-wheel drive system supported by two motors, one on each axle. The motor(s) used are Permanent Magnet Synchronous Motors.
The front suspension is MacPherson Strut, and the rear suspension is Multilink. It uses steel springs and hydraulic dampers. The suspension has a fixed height and damping. The ground clearance with this suspension is 113 mm.
The rear and front brakes are cast-iron discs.
Regenerative braking is available in two modes. You can use one-pedal driving or you can coast and use the blended brakes to regen.
You can choose between 5 different paint colors when ordering this model.
The car has four regular doors and a hatchback style liftegate.
There is only one roof for this model. The standard is a panoramic roof.
The windows from B-pillar and back are tinted.
XPENG P7 AWD Performance
The seat layout is the traditional five seats with two in front and three seats in the rear.
First row seats
Only one front seat type is available in the XPENG P7 AWD Performance.
The following functionalities are available on the **** seat.
- electric adjustment
- memory driver seat
- electric lumbar support
- backrest side bolster adjustemnt
- Seat cushion side bolster adjustement
- electric adjustable thigh support
- leg support for passenger
You can choose from 2 different materials/colors for this seat type.
The second row has a standard three-seat bench with a 60:40 split where you can fold each section separately to increase the cargo space. In addition, the following functionalities are available.
There is only one type of steering wheel available. The steering wheel is heated, and you can control the audio system with buttons on the steering wheel.
There is one climate system available. The 4-zone climate system supports different temperatures in four zones for the driver, passenger, and two separate passengers in the back seat. This model has a heat pump as standard. This heat pump can save significant energy used for heating in cold weather.
XPENG P7 AWD Performance has several features to make your life as a driver or passenger more comfortable.
Keyless entry allows access to the car without needing to find the key. As long you bring it with you, the doors open.
Keyless go makes it possible to start the car without needing to use the key.
The steering wheel is electrically adjustable.
You have wireless charging for your phone.
User interface and control
XPENG P7 AWD Performance has twin screens on a shared frame mounted with brackets on top of the dashboard. Behind the steering wheel is a digital instrument cluster, and on the right part, there is a infotainment screen. The screen behind the steering wheel mounted into the dashboard is 10,25 inches large. The touch screen on the dashboard’s center is 14,96 inches large.
XPENG P7 AWD Performance
This model is equipped with voice control as standard. The voice control lets you control some functionality through voice commands.
This model is equipped with gesture gestura control system that lets you control specific features.
One type of sound system is available for the XPENG P7 AWD Performance. With the , you get NULL amplifier channels and eight speakers with a max system output of 500 watts.
In addition, with the standard in-car navigation system, you get the help you need to find your destination.
Advanced driver assistance systems
The XPENG P7 AWD Performance has several standard and optional advanced driver assistance systems (ADAS) for better safety and comfort.
The XPENG P7 AWD Performance has a anti-lock braking system (ABS) as a standard system. This system helps to prevent a vehicle’s wheels from locking up during braking.
The XPENG P7 AWD Performance has a Electronic Stability Control as a standard system that is designed to improve the stability and handling of a vehicle during sudden maneuvers or slippery road conditions.
The XPENG P7 AWD Performance has a lane keeping assist as a standard system. This system helps to prevent the car from getting out of its lane. In addition, it has lane departure warning system that warns the driver if the vehicle leaves the driving lane.
Front Cross Traffic Assist is a standard driver assist system that helps drivers detect oncoming traffic when crossing an intersection or turning left or right from a stopped position.
Rear Cross Traffic Alert is a standard driver assist system that uses sensors to detect approaching vehicles from the side when backing out of a parking space or driveway.
Forward Collision Warning is a standard driver assist system that is designed to help drivers avoid or mitigate frontal collisions.
The XPENG P7 AWD Performance has a automatic emergency braking as a standard system. This system helps prevent or mitigate collisions by applying the brakes autonomously if the driver fails to react to an impending collision.
Blind spot monitoring is a standard driver assist system. This side assist system helps to detect traffic in blind spots.
With the level 2 system, you get the following driving automation features.
- Adaptive Cruise control
- Autosteer: keeps the car in your lane and slows down if needed in traffic. The system limits how long you can drive without touching the steering wheel.
- Automatic parking.
Cargo Capacity and Towing Ability
On the roof, you can load up to 50kg. Under the hood, there is frunk with more storage room. This frunk is 0 liters. Max weight is 2570kg, and with the base weight of 2055 kg, you can max load 515 kg, including driver and passengers. Some options can increase the base weight and reduce the max loading weight.
This model is not available with a towbar. So if you need to pull a trailer, you must look at other models.