Use the links below to jump to a section, or continue reading for the full article. You can also view the full specifications, image gallery, charging performance, and online reviews. Sections:
Performance
The BYD Seagull 38kWh has a maximum power of 55 kW (75 hp / 74 bhp) and a total torque of 135 Nm (100 lb-ft). It accelerates from 0 to 100 km/h (0 to 62 mph) in 13 seconds and reaches a top speed of 130 km/h (81 mph).
Battery, Range, and Charging
The battery has a gross capacity of 38.8 kWh and a net usable capacity of 37.0 kWh, with a 1.8 kWh buffer (4.6%) for battery protection. With a nominal voltage of 403 volts, the system is classified as a 400-volt battery system.
The lithium-ion battery uses LFP technology, which has different characteristics from typical NCA and NMC batteries.
The vehicle's range, according to the CLTC (China Light-Duty Vehicle Test Cycle) standard, is 405 km (252 miles).
The energy consumption is 9.1 kWh/100 km based on the CLTC standard test.
For more details about the range, see real-world data and range listings on this model’s range and consumption page.
The vehicle supports fast DC charging with a maximum power of 40 kW. A 0–100% charge takes approximately 86 minutes. A typical 10–80% session takes about 43 minutes at an average power of 36 kW.
With five minutes of overhead per stop, the optimal charging window is 13–75%. Effective average power, including overhead, is 33 kW over a session lasting about 42 minutes and 16 seconds.
In a 1000 km challenge at a constant speed of 120 km/h (75 mph) with an assumed consumption rate of 19 kWh/100 km, the trip would take about 13 hours and 4 minutes, needing six charging stops from 10% to 79%, totaling 284 minutes of charging time.
Onboard Charger
The standard onboard charger supports AC charging at up to 6.6 kW. A full 0–100% charge takes about 5 hours and 36 minutes with a suitable home charging setup.
Charge Port
The charge port is conveniently located on the right front side, facilitating easy access at charging stations where you park parallel to the charger.
Connector types vary by market: this model uses CCS Combo 1 in North America and CCS Combo 2 in Europe. For complete specifications for all markets, refer to the full specifications.
Drivetrain
The BYD Seagull 38kWh has a front-wheel drive system supported by one motor on the front axle.
The motor used is Permanent Magnet Synchronous Motor.
Suspension
The suspension system features a MacPherson strut front construction and a torsion beam rear construction. Both the front and rear dampers are monotube dampers, providing consistent performance and durability. The front and rear springs are coil springs, offering a balance of comfort and performance.
The Standard suspension has a fixed height and damping characteristics.
Ground clearance with this setup is 150 mm.
Steering
Progressive steering is standard on the BYD Seagull 38kWh. It adjusts the steering ratio according to vehicle speed.
Drive Modes
The BYD Seagull 38kWh lets the user select different drive modes that affect the car's handling.
The driver can choose between 1 modes:
- : Default drive mode settings.
Brakes
The BYD Seagull 38kWh is equipped with cast-iron disc brakes on both the front and rear.
Regenerative Braking
Automatic regeneration is not available in this model. However, regenerative braking is available through one-pedal driving combined with blended brakes.
The maximum regenerative braking power is 200 kW.
Exterior
The BYD Seagull 38kWh, with dimensions of 3780 mm in length, 1715 mm in width, and 1540 mm in height, falls into the A-segment, also known as city or mini cars.
The BYD Seagull 38kWh is available in a total of 4 solid paint colors.
You can select from multiple wheel designs, all available in the same size, on the BYD Seagull 38kWh. The available tire and wheel combinations include:
- 175/55 tires on 16" rims
The car has four regular doors and a boot lid for the trunk.
There is only one roof option for this model.
A conventional roof is standard.
The windows behind the B-pillar are tinted for privacy and to reduce glare and solar heat gain.
BYD Seagull 38kWh
Interior
The interior of the BYD Seagull 38kWh is functional, featuring budget materials in several areas. It includes a traditional center console that separates the driver and passenger with integrated storage.
Seats
The seat layout is the two seats in front and two seats in the rear.
First Row Seats
The BYD Seagull 38kWh offers a single type of front seat.
The standard seat offers:
- Fore-and-aft adjustment (manually adjustable)
- Recline adjustment (manually adjustable)
- Height adjustment (manually adjustable)
- Seat cushion angle adjustment (optional)
Available in:
- Black leatherette upholstery
Second-Row Seats
The second row has a two-seat bench configuration.
Additional second-row features include:
BYD Seagull 38kWh
Interior Storage
The BYD Seagull 38kWh has limited interior storage options.
- Glove Compartment: Located in the dashboard in front of the passenger.
- Center Console: A storage compartment is located beneath the front center armrest.
- Door Pockets: The front doors include integrated storage pockets.
Interior Lighting
The BYD Seagull 38kWh offers several interior lighting options.
- Dome Light: A dome light is mounted in the roof area.
- Roof Reading Light: A reading light is mounted in the roof area.
Climate System
There is one climate system available:
- 1-zone climate system: Controls a single zone for the whole cabin.
This model does not have a heat pump. This can increase consumption in cold weather compared to models with a heat pump.
Comfort Features
The BYD Seagull 38kWh includes the following comfort features:
- Air Fragrance: Releases scent into the cabin through the ventilation system.
User Interface and Control
The BYD Seagull 38kWh features a screen-focused control interface with limited physical buttons and no stalks, providing a minimalist approach to vehicle controls. This design prioritizes touchscreen interaction, which may appeal to tech-savvy users but could be less intuitive for those accustomed to traditional controls.
Behind the steering wheel is a digital instrument cluster, and on the right part, there is an infotainment screen.
Key screen details:
- Driver Information Display: A 7.0-inch screen mounted directly on the dashboard behind the steering wheel. This compact display shows essential driving information such as speed, range, and navigation prompts.
- Center Dashboard Touchscreen: The 10.1-inch touchscreen is located at the center of the dashboard. It serves as the main interface for infotainment, navigation, and vehicle settings.
The BYD Seagull 38kWh does not have a head-up display. Speed and navigation information remain on the vehicle's other displays.
BYD Seagull 38kWh
Steering Wheel
The BYD Seagull 38kWh is equipped with a single type of steering wheel:
The steering wheel is adjustable for tilt. The adjustment is electrically powered.
Design: Circular
Controls: Physical buttons
Heating: Not available
From the steering wheel you can control:
- Infotainment: Steering-wheel controls provide access to media and infotainment functions.
Mirrors
Both the exterior and interior mirrors use conventional mirror technology to provide a clear view of the area behind the vehicle.
Infotainment
The BYD Seagull 38kWh features the BYD DiLink infotainment system, built on Android, with navigation, media, and vehicle settings through the touchscreen display. It supports over-the-air updates.
Navigation System
The built-in navigation system uses detailed maps and offers advanced route planning. It provides real-time traffic information to support an efficient and stress-free journey.
Sound System
The BYD Seagull 38kWh has one sound system option:
- Dirac: Features eight speakers.
The model includes USB-A connectivity as standard (total: 1).
Mobile App
The BYD Seagull 38kWh has a mobile app for Android and iOS to manage and monitor the vehicle remotely. Features:
- Locate Your Vehicle: Check the current location of your car.
- Preconditioning: Preheat or cool your car before you start your journey.
- Lock and unlock: Lock or unlock the doors remotely.
- Scheduled Charging: Set a charging schedule.
- Charge Target: Set the battery's target state of charge.
- Driving History: Review the details of your past trips.
Lights
Standard Headlights: These use LED technology.
The taillights use LED technology.
Advanced Driver Assistance Systems
The BYD Seagull 38kWh offers standard and optional advanced driver assistance systems (ADAS).
Safety Systems
Anti-lock Braking System (ABS): Standard on the BYD Seagull 38kWh. It prevents the wheels from locking during braking.
Electronic Stability Control (ESC): Standard on the BYD Seagull 38kWh. It improves stability during sudden maneuvers and on slippery roads.
Lane-Keeping Assist (LKA): Standard on the BYD Seagull 38kWh. It applies steering corrections if the vehicle begins to leave its lane.
The Lane Departure Warning alerts the driver if the vehicle begins to leave its lane.
Forward Collision Warning (FCW): Optional on the BYD Seagull 38kWh. It warns the driver of a potential frontal collision.
Automatic Emergency Braking (AEB): Optional on the BYD Seagull 38kWh. It applies the brakes automatically if the driver does not respond to an imminent collision.
Driving Automation
The BYD Seagull 38kWh offers driving automation at level 1, depending on the equipment level.
The Level 1 system provides the following driving automation features.
Safety
The BYD Seagull 38kWh is equipped with the following airbags:
- Front airbags for the driver and front passenger
- Side curtain airbags for both the first and second rows
- Side airbags for the driver and front passenger
Security and Access Technologies
The BYD Seagull 38kWh includes the following security and access features:
- Keyless Entry and Start: Unlock and start the car with the key in your pocket or bag.
- Alarm System: Monitors for unauthorized entry or tampering and sounds the alarm when triggered.
Cargo Capacity and Towing Ability
The trunk offers a cargo capacity of 300 liters (10.6 cu ft). With the rear seat folded down, this expands to 900 liters (31.8 cu ft).
The maximum permitted vehicle weight is 1550 kg (3417 lbs), and the base curb weight is 1240 kg (2734 lbs). This leaves a payload of 310 kg (683 lbs), including occupants. Options can increase curb weight and reduce payload.
This model is not available with a towbar and cannot tow a trailer.
Availability & Pricing
The BYD Seagull 38kWh had its world premiere on 4/18/2023, with deliveries starting in May 2023.
This model is available exclusively in China.
Regional Variants
This model is sold under different names in other regions: