Use the links below to jump to a section, or continue reading for the full article. You can also view the full specifications, image gallery, charging performance, and online reviews. Sections:
Performance
Hyundai IONIQ 5 Project 45 AWD
Battery, Range, and Charging
The battery has a gross capacity of 72.6 kWh and a net usable capacity of 70.0 kWh, with a 2.6 kWh buffer (3.6%) for battery protection. The battery operates at a nominal voltage of 653 V, supporting high-power DC charging.
The lithium-ion battery uses NMC (nickel manganese cobalt) chemistry.
According to the WLTP (Worldwide Harmonized Light Vehicles Test Procedure) standard, the vehicle's range is 430 km (267 miles), with an energy consumption rate of 16.3 kWh/100 km (3.8 mi/kWh).
For more details about the range, see real-world data and range listings on this model’s range and consumption page.
The vehicle supports fast DC charging with a maximum power of 221 kW. A 0–100% charge takes approximately 44 minutes. A typical 10–80% session takes about 16 minutes at an average power of 181 kW.
With five minutes of overhead per stop, the optimal charging window is 1–78%. Effective average power, including overhead, is 143 kW over a session lasting about 23 minutes and 38 seconds.
This efficient charging capability makes the Hyundai IONIQ 5 Project 45 AWD a convenient option for long-distance travel.
In a 1000 km challenge at a constant speed of 120 km/h (75 mph) with an assumed consumption rate of 24 kWh/100 km, the trip would take about 9 hours and 31 minutes, needing three charging stops from 1% to 82%, totaling 72 minutes of charging time.
Onboard Charger
The standard onboard charger supports AC charging at up to 11 kW. A full 0–100% charge takes about 6 hours and 21 minutes with a suitable home charging setup.
Charge Port
The location of the charge port is on the right rear side. This placement makes it easy to use charging stations that require backing up to connect.
This model uses a CCS Combo 2 connector in its charge port.
Bidirectional Charging
This model supports V2L (Vehicle to Load), allowing you to power electrical equipment requiring up to 3.6 kW of power, and even charge other electric vehicles.
Drivetrain
The Hyundai IONIQ 5 Project 45 AWD features an all-wheel drive system powered by two motors, one on each axle.
The motors used are Permanent Magnet Synchronous Motors.
Suspension
en drivetrain.suspension.standard.frontconstruction_macphersonstrut.rearconstruction_multilink.frontdampers_notset.reardampers_notset.frontspring_coil.rearspring_coil
The Standard suspension has a fixed height and damping characteristics.
Ground clearance with this setup is 160 mm.
Drive Modes
The Hyundai IONIQ 5 Project 45 AWD lets the user select different drive modes that affect the car's handling.
The driver can choose between 4 modes:
- ECO: Comfort steering and throttle.
- NORMAL: Balanced steering and throttle.
- SPORT: Dynamic steering and throttle.
- SNOW: Comfort steering and throttle.
Brakes
The Hyundai IONIQ 5 Project 45 AWD is equipped with cast-iron disc brakes on both the front and rear.
The front discs measure 345 mm, while the rear discs are 345 mm.
Regenerative Braking
The regenerative braking system in this model offers several modes. The most efficient option is the Automatic Regeneration Mode, where the vehicle coasts when possible and employs regenerative braking to reduce speed as needed.
Manual regeneration is another mode, where regenerative braking is controlled by pressing the brake pedal. The brake system blends in physical brakes only when necessary.
Another option is the Regen on Accelerator Pedal mode where regenerative braking is activated when the driver eases off the accelerator pedal. This system allows the vehicle to slow down and recover energy without the driver needing to press the brake pedal, a feature often referred to as one-pedal driving.
Drivers can also adjust the regenerative braking strength when lifting off the accelerator. There are four levels of regenerative braking to choose from, allowing you to customize the driving experience to your preference.
Exterior
The Hyundai IONIQ 5 Project 45 AWD is classified as a compact SUV (C-SUV). It measures 4635 mm long, 1890 mm wide, and 1605 mm tall.
The Hyundai IONIQ 5 Project 45 AWD offers a selection of 8 paint colors, featuring solid, metallic, and matte options.
You can select from multiple wheel designs, all available in the same size, on the Hyundai IONIQ 5 Project 45 AWD. The available tire and wheel combinations include:
- 255/45 tires on 20" rims
The car has four regular doors and a hatchback-style liftgate.
There is only one roof option for this model.
A conventional roof is standard.
Privacy glass from the B-pillar rearward is optional. It reduces glare and solar heat.
Hyundai IONIQ 5 Project 45 AWD
Interior
There is one seat type you can select in different materials.
Seats
The Hyundai IONIQ 5 Project 45 AWD accommodates five passengers with two front seats and a three-seat bench in the rear.
First Row Seats
The Hyundai IONIQ 5 Project 45 AWD offers a single type of front seat.
The following functionalities are available on the seat:
- Fore-and-aft adjustment (electrically adjustable)
- Recline adjustment (electrically adjustable)
- Height adjustment (electrically adjustable for driver, not available for passenger)
- Height adjustable headrest
- Heating
- Memory
- Adjustable lumbar support (electrically adjustable as an option)
- Ventilation (optional)
- Leg support for passenger
Available in:
- Black fabric/leatherette upholstery
- Black leather upholstery
- Black/White leather upholstery
- Gray leather upholstery
- Gray microfiber/leatherette upholstery
- Gray microfiber/leatherette upholstery
Hyundai IONIQ 5 Project 45 AWD
Second-Row Seats
The second row features a standard three-seat bench with a 60:40 split, allowing each section to fold separately to increase cargo space.
Additional second-row features include:
- Recline adjustment (manually adjustable)
- Height adjustable headrest (standard for outer seats)
- Heating (standard for outer seats)
- ISOFIX (standard for outer seats)
Hyundai IONIQ 5 Project 45 AWD
Interior Storage
The Hyundai IONIQ 5 Project 45 AWD has the following interior storage:
- Glove Compartment: Located in the dashboard in front of the passenger.
- Door Pockets: The front and rear doors include integrated storage pockets.
Interior Lighting
The Hyundai IONIQ 5 Project 45 AWD offers several interior lighting options.
- Multicolor Ambient Lighting: Extends across the dashboard and door panels, with selectable colors.
Climate System
There is one climate system available:
- 2-zone climate system: Supports different temperatures for the driver and passenger.
A standard heat pump reduces heating energy use in cold weather.
User Interface and Control
The Hyundai IONIQ 5 Project 45 AWD features a screen-focused control interface with limited physical buttons and no stalks, providing a minimalist approach to vehicle controls. This design prioritizes touchscreen interaction, which may appeal to tech-savvy users but could be less intuitive for those accustomed to traditional controls.
This model features a dual-screen setup integrated into a shared horizontal frame on the dashboard, clearly separating driver and infotainment functions while maintaining a unified visual design.
Key screen details:
- en uicontrols.screen.info.BehindSteeringWheelLeftSideOfSharedFrameTopOfDash.
- A touchscreen is located on the right side of the shared dashboard frame.
A standard head-up display projects key driving information—such as speed and navigation cues—onto the windshield.
Hyundai IONIQ 5 Project 45 AWD
Steering Wheel
The Hyundai IONIQ 5 Project 45 AWD is equipped with a single type of steering wheel:
The steering wheel adjusts for tilt and reach. The adjustment is manual.
Design: Circular
Controls: Physical buttons, Scroll wheels
Heating: Available as an option
From the steering wheel you can control:
- Audio control
- Phone Controls: Buttons on the steering wheel allow you to answer, end, and manage phone calls.
- Voice Control: A button on the steering wheel activates the voice control system.
- Cruise Control: A stalk or button on the steering wheel allows you to set and adjust the cruise control speed.
- Drive Mode Selector: A dedicated control allows you to switch between different drive modes.
Mirrors
Both the exterior and interior mirrors use conventional mirror technology to provide a clear view of the area behind the vehicle.
Voice control is standard.
Infotainment
The Hyundai IONIQ 5 Project 45 AWD features the ccOS infotainment system with navigation, media, and vehicle settings.
Navigation System
The built-in navigation system uses detailed maps and offers advanced route planning, allowing you to define the target charge level at your destination. The system provides real-time traffic information ensuring an efficient and stress-free journey.
Phone Mirroring
The Hyundai IONIQ 5 Project 45 AWD supports Android Auto and Apple CarPlay, providing access to compatible phone apps such as Google Maps and Waze on the car's display.
Sound System
The Hyundai IONIQ 5 Project 45 AWD has one sound system option:
- Bose Premium Sound System: Features eight speakers.
The model includes USB-C connectivity as standard (total: 4).The model includes USB-A connectivity as standard (total: 1).
Mobile App
The Hyundai IONIQ 5 Project 45 AWD has a mobile app for Android and iOS to manage and monitor the vehicle remotely. Features:
- Locate Your Vehicle: Check the current location of your car.
- Preconditioning: Preheat or cool your car before you start your journey.
- Lock and unlock: Lock or unlock the doors remotely.
- Scheduled Charging: Set a charging schedule.
- Charge Target: Set the battery's target state of charge.
- Find your car: Sound the horn or flash the lights to locate the car.
- Route Planning: Plan your route and send it directly to your car's navigation system.
- Driving History: Review the details of your past trips.
Lights
Standard Headlights: These use LED technology.
The taillights use LED technology.
Hyundai IONIQ 5 Project 45 AWD
Advanced Driver Assistance Systems
The Hyundai IONIQ 5 Project 45 AWD offers standard and optional advanced driver assistance systems (ADAS).
Efficiency Assist: A Standard feature that helps drivers anticipate driving conditions and conserve energy.
Safety Systems
Anti-lock Braking System (ABS): Standard on the Hyundai IONIQ 5 Project 45 AWD. It prevents the wheels from locking during braking.
Electronic Stability Control (ESC): Standard on the Hyundai IONIQ 5 Project 45 AWD. It improves stability during sudden maneuvers and on slippery roads.
Lane-Keeping Assist (LKA): Standard on the Hyundai IONIQ 5 Project 45 AWD. It applies steering corrections if the vehicle begins to leave its lane.
The Lane Departure Warning alerts the driver if the vehicle begins to leave its lane.
Front Cross Traffic Assist (FCTA): Standard on the Hyundai IONIQ 5 Project 45 AWD. It detects traffic crossing ahead when entering an intersection or pulling away from a stop.
Rear Cross Traffic Alert (RCTA): Standard on the Hyundai IONIQ 5 Project 45 AWD. It detects vehicles approaching from the side while reversing out of a parking space or driveway.
Forward Collision Warning (FCW): Standard on the Hyundai IONIQ 5 Project 45 AWD. It warns the driver of a potential frontal collision.
Automatic Emergency Braking (AEB): Standard on the Hyundai IONIQ 5 Project 45 AWD. It applies the brakes automatically if the driver does not respond to an imminent collision.
Automatic Emergency Steering (AES): Standard on the Hyundai IONIQ 5 Project 45 AWD. The system can steer automatically to help avoid an imminent collision.
Blind-spot Monitoring (BSM): Standard on the Hyundai IONIQ 5 Project 45 AWD. It detects traffic in the vehicle's blind spots.
Exit Warning: Standard on the Hyundai IONIQ 5 Project 45 AWD. It warns occupants not to open a door when it detects approaching traffic or another hazard.
Driving Automation
The standard Highway Driving Assist SAE Level 2 system includes the following driving automation features:
- Adaptive Cruise Control (ACC)
- Lane Centering Assist (LCA) / AutoSteer: Centers the vehicle in its lane and adjusts speed in traffic. The driver must keep their hands on the steering wheel and remain attentive.
- Automatic parking (optional)
- Automatic Lane Change (ALC)
Safety
The Hyundai IONIQ 5 Project 45 AWD is equipped with the following airbags:
- Front airbags for the driver and front passenger
- Side curtain airbags for both the first and second rows
- Side airbags for the driver and front passenger
- A front-center airbag that reduces the risk of the driver and front passenger colliding with each other during a side impact
The front and rear seatbelts are equipped with pyrotechnic pretensioners and load limiters. In the event of a collision, the pretensioners tighten the seatbelts to secure occupants firmly in their seats, while the load limiters allow a controlled amount of webbing to extend, reducing the risk of injury from excessive force.
The Hyundai IONIQ 5 Project 45 AWD has been rigorously tested by Euro NCAP, an independent organization that evaluates vehicle safety. It received a 5-star rating, with the following scores:
- Adult Occupant: 88%
- Child Occupant: 86%
- Vulnerable Road Users: 63%
- Safety Assist: 88%
Security and Access Technologies
The Hyundai IONIQ 5 Project 45 AWD includes the following security and access features:
- Keyless Entry and Start: Unlock and start the car with the key in your pocket or bag.
- Alarm System: Monitors for unauthorized entry or tampering and sounds the alarm when triggered.
Cargo Capacity and Towing Ability
The trunk offers a cargo capacity of 527 liters (18.6 cu ft). With the rear seat folded down, this expands to 1578 liters (55.7 cu ft).
The maximum roof load is 80 kg (176.4 lb).
The frunk (front trunk) has a capacity of 24 liters (0.8 cu ft).
The maximum permitted vehicle weight is 2540 kg (5600 lbs), and the base curb weight is 2045 kg (4508 lbs). This leaves a payload of 495 kg (1091 lbs), including occupants. Options can increase curb weight and reduce payload.
495 kg is considered low for this type of car and may limit how much cargo you can carry in addition to passengers.
A towbar can be added to the vehicle. The maximum permissible weight for a braked trailer is 1600 kg (3527 lbs), while for an unbraked trailer, it is 750 kg (1653 lbs).
Availability & Pricing
This model had a world premiere on 2/23/2021, and deliveries started in July 2021. This model has now been discontinued.